Riverside Epoxy Flooring Group is the Inland Valley's go-to team for driveway resurfacing, specializing in driveway apron coatings, front walk coatings, and textured quartz driveway finishes. We offer UV-stable polyaspartic topcoats and routed crack repair.
Get a free floor estimate
Our team provides degreasing and diamond grinding of oil-soaked concrete, delivering clean, even curb appeal for homes and hard-wearing drive lanes for both residential and commercial projects. Backed by 12 years in business and our 2-year workmanship warranty, we've completed over 1,187 projects, from a single stained apron to a garage floor and driveway coated to match.
From chasing every hairline crack to the final grit-loaded clear coat that grips in the rain, our team handles every detail. Serving Riverside and neighboring El Sobrante, Eastvale and Woodcrest, we resurface tired driveways so the front of the house looks cared for again.
Request a free estimate, and we will check whether your driveway can be resurfaced before anyone talks about tearing it out.
What you can hold us to
A driveway can be resurfaced instead of replaced when the slab underneath is sound, meaning it is stained, spalled or cracked at the surface but not sinking or heaving. Most of the El Sobrante and Eastvale driveways we look at were poured in the 2000s and are structurally fine under the oil and the hairline cracks, which makes them resurfacing jobs. Tear-out is the answer only when sections have dropped, lifted at a tree root or broken through, which we see more often on older North Tustin and Claremont slabs than on newer tracts.
Resurfacing keeps the base, the forms and the city approach untouched, so the job typically takes an estimated 1 to 2 days per apron or walk instead of the demolition, new pour and cure a replacement needs.
Paula, Lake Hills, El Sobrante
A stained, cracked driveway apron and front walk that let the house down
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Paula's front walk and driveway apron in Lake Hills, El Sobrante was a stained, cracked driveway apron and front walk that let the house down. We recommended routing and filling the cracks, then a textured UV-stable coating that grips in rain: a UV-stable polyaspartic over a grind and crack repair, finished in a gray quartz texture across the front walk and driveway apron, about 360 sq ft. The job was an estimated $2,400 to $3,800 and took an estimated 1 to 2 days, crack repair included. Paula now has a clean apron and walk in one color, with the old oil stains sealed under.
A driveway coating has to survive three things an interior floor never sees: hot tires, dripping oil and full sun. Hot tires off the 91 and the 15 soften thin sealers and pull them up, so every driveway system we install is rated for tire contact heat from 140°F to 180°F. Oil soaks into bare concrete in Woodcrest and Norco driveways where trucks and trailers park for days, so we degrease and grind until the stain stops wicking before any coat goes down.
Sun rules out most interior products, because aromatic epoxy ambers outdoors, and plain 100% solids epoxy typically needs 72 to 96 hours before a car can park on it. Our driveway coats finish in a UV-stable aliphatic polyaspartic clear coat that will not amber in the sun, the same top we use on garage floors that face west in Yorba Linda and Diamond Bar.
The process runs in five steps, and most aprons and front walks are finished in an estimated 1 to 2 days.
Homeowner associations in gated tracts such as Victoria Grove in El Sobrante and the master-planned streets of Eastvale may review exterior finish colors, so we plan for that approval before booking. We give you a color sample board and the product sheet to submit to your board, and the install date is set only after you have the board's answer. Earth-tone grays and tans are the shades we most often see approved on Victoria Grove and Eastvale Square stucco tracts, though your own association's rules decide.
Diamond grind, crack fill, 100% solids basecoat, clear topcoat
Full broadcast vinyl flake, UV-stable clear coat, park in about a day
Grind, stem walls optional, double broadcast flake, polyaspartic topcoat
Moisture-mitigating primer, then flake, color or polished finish
Hand-worked metallic pigment over a flat primed slab, high-gloss clear
Colored quartz double broadcast, textured slip-resistant topcoat
UV-stable polyaspartic with textured flake or quartz
Heavy-build epoxy for jacks, mats, tack and tools
Phased by section, high-build epoxy or quartz, cove and striping as needed
Failed DIY paint or peeling epoxy ground off before the new system
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Driveway resurfacing in Riverside is typically estimated at $1,200 to $4,000 per apron, walk or driveway section of 200 to 400 sq ft, and crack repair, oil removal and the finish move the price most. A full two-car driveway is quoted as more than one section.
| Job | Est. investment | Est. duration |
|---|---|---|
| Driveway apron, walk or section coating (200 to 400 sq ft) | Est. $1,200 to $4,000 per section | Est. 1 to 2 days |
| Apron and front walk with crack repair, quartz texture | Est. $2,400 to $3,800 per area | Est. 1 to 2 days |
| Failed sealer or paint removal by diamond grinding (400 to 600 sq ft) | Est. $800 to $3,000 per area | Est. 4 to 8 hours |
| Matching two-car garage floor, full flake polyaspartic | Est. $2,800 to $6,200 per garage | Est. 1 to 2 days |
Most Lake Hills and Eastvale Square aprons we price land in the middle of the section range, while a peeling store-bought sealer that has to be ground off typically adds an estimated $800 to $3,000. California caps a home improvement deposit at $1,000 or 10% of the contract, whichever is less, and that is the most we collect up front.
These driveway prices are estimates and remain subject to change. Your written quote after the inspection sets the final price and the schedule, based on the square footage, the crack and oil work, and the finish you pick.
A UV-stable polyaspartic coating with quartz texture is the system we recommend for a sound driveway, a cement overlay suits a surface that is badly scaled, and a clear sealer only slows staining.
| Option | What it fixes | Tire load and sun | Return to use |
|---|---|---|---|
| Polyaspartic with quartz texture | Stains, hairline cracks, dull color | Rated for tire contact heat from 140°F to 180°F | Park-on typically 24 to 36 hours |
| Cementitious overlay | Heavy scaling, common on older Lemon Heights drives | Good, color fades without a sealer | Longer cure set by the overlay maker |
| Penetrating sealer | Slows new oil stains on a Wood Streets driveway | Wears off under tires | Reapply every 2 to 4 years |
| Tear-out and new pour | Sunken or broken slabs | New concrete, still stains | Weeks of demolition and cure |
The same chemistry runs through our polyaspartic garage floors, so a driveway and garage can share one color, and a flake and chip floor inside the garage hides tracked-in grit from the apron.
The crew that grinds your driveway is the crew that coats it, and our surface prep technician runs the grinder until the oil stops wicking. In 12 years and more than 1,187 projects, the driveways that failed on us early were the ones a homeowner had sealed without grinding, which is why we never skip it.
We resurface driveways across a 45-mile radius of Riverside, with steady work in El Sobrante's gated tracts, Eastvale HOA neighborhoods and Yorba Linda hillside streets. Canyon Crest, Woodcrest, Norco and Claremont driveways are on the route too.
Driveway customers often pair the job with patio and pool deck coatings out back, or with a garage floor epoxy coating so the tracked grit stops at a sealed floor.
Driveway resurfacing is typically estimated at $1,200 to $4,000 per section of 200 to 400 sq ft, and your written quote sets the final price.
Yes, if the slab is not sinking or heaving, we route and fill the cracks and coat over a sound base.
Yes, every driveway system we install is rated for tire contact heat from 140°F to 180°F.
Most aprons are coated in an estimated 1 to 2 days, and polyaspartic typically takes 24 to 36 hours before parking.
Many associations in El Sobrante and Eastvale review exterior colors, so we give you a sample board and product sheet for the board first.
No, we degrease and grind the stains before coating, and the quartz texture seals them under.
Call us or request a free estimate, and we will inspect the slab, mark every crack and hand you a written scope for the apron, walk or full driveway.
Start to finish
We walk the slab with you, map cracks, joints and old coatings, and take moisture readings before a system is named.
The system, every coat and its thickness, the colors and the cure and return-to-service times arrive in writing.
The slab is diamond ground with dust control, cracks and joints are filled, and each coat goes down inside its recoat window.
We walk the cured floor with you, go over the care notes and tell you when cars or equipment can come back.
Where we work
Call us or send the form, and we will book a free moisture test and a written estimate.
Calls only, we do not receive text messages.
