Riverside Epoxy Flooring Group is Southern California's top-rated pros for flake and chip floor systems, specializing in full broadcast vinyl flake, partial flake accents, and custom multi-color chip blends. We offer domino, gravel and earth-tone blends and textured clear coats with aluminum oxide grit.
Get a free floor estimate
Our team provides blend sample boards at the estimate, delivering a garage that hides dust and tire marks for homes and hard-wearing broadcast floors for both residential and commercial projects. Backed by 12 years in business and our 2-year workmanship warranty, we've completed over 1,187 projects, from a single-bay partial flake floor to three-car garages with a double broadcast.
From throwing the flake to refusal while the base is wet to scraping and sealing every chip under the clear, our team handles every detail. Serving Riverside and neighboring Norco, Yorba Linda and Woodcrest, we match each blend to the dirt, dust and light your garage actually sees.
Call today for a free estimate, and we will bring flake samples so you can see each blend on your own slab.
What you can hold us to
Brian, east side near the horse trails, Yorba Linda
A three-car garage with a gym corner and hot tires coming in off the 91 every evening
Debbie, Western-theme lot near the riding trails, Norco
A garage that doubles as the tack and feed room, tracked with dirt every day
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Brian's 3-car garage, about 720 sq ft, in Yorba Linda has a gym corner and takes hot tires off the 91 every evening. We laid a polyurea base with a domino flake full broadcast and a two-coat clear for hot-tire resistance; the floor was an estimated $4,800 to $6,900 and took an estimated 2 to 3 days. After a summer of hot cars there are no tire marks, and his rubber gym mats sit flat on the full broadcast.
Debbie's garage in Norco doubles as the tack and feed room and is tracked with dirt every day, so the choice was a polyaspartic flake system in a saddle and sand blend with grit in the clear coat. Her 2-car garage, about 500 sq ft, was an estimated $3,200 to $4,900 and an estimated 1 to 2 days of work, and it hides arena dust between hosings and grips with wet boots.
A flake floor is built in four layers, and the broadcast is the step that decides how it looks and wears. Our process on a typical two-car garage runs an estimated 1 to 2 days.
Full broadcast hides more and lasts longer; partial flake shows more of the base color and costs less. On a full broadcast the flake covers the whole floor, so dust, tire marks and old repairs disappear into the pattern, and the extra layer of chips adds thickness. A partial scatter leaves the solid base visible between chips, which reads cleaner and more modern but shows dust and scuffs sooner.
| Coverage | Hides dust and tire marks | Texture and grip | Cleaning |
|---|---|---|---|
| Solid color, no flake | Shows everything | Smooth, slick when wet without grit | Easiest to mop |
| Partial flake scatter | Hides some | Light texture | Easy to mop |
| Full broadcast to refusal | Hides the most | Most texture under the clear | Easy, a soft brush helps |
For a working garage in Norco or El Sobrante, where horse lots and dirt roads send dust in every day, full broadcast is the practical choice. Monica's Woodcrest garage took a partial flake because the owners wanted the base color to show.
Most homeowners choose a blend by the dirt it has to hide and the house it has to match, rather than by the sample alone. Earth blends like Debbie's saddle and sand disappear under arena dust, gray and black blends like the one in Marcus's Canyon Crest garage hide oil drips and tire marks, and domino blends read crisp under bright shop lights.
Teresa's Yorba Linda makeover went with a saddle tan full flake so the floor sat warm under new cabinets.
Texture trades grip against easy cleaning: the more grit in the clear, the better wet boots hold and the more a mop drags. We set the grit by where the floor gets wet, the same way we did on Kathy's pool surround in Villa Park. A garage where cars drip rain or a pool towel lands near the door gets grit there, while a dry garage in Claremont or San Antonio Heights can stay smoother for easy sweeping.
A full broadcast already carries texture under the clear, so most flake floors need only a light grit. Weekly dust mopping and a monthly wash with warm water and a neutral pH cleaner keep the clear coat bright.
A flake floor in Riverside is typically estimated at $2,800 to $6,200 for a two-car garage with full broadcast, and coverage, garage size and slab condition move the price most.
Diamond grind, crack fill, 100% solids basecoat, clear topcoat
Full broadcast vinyl flake, UV-stable clear coat, park in about a day
Grind, stem walls optional, double broadcast flake, polyaspartic topcoat
Moisture-mitigating primer, then flake, color or polished finish
Hand-worked metallic pigment over a flat primed slab, high-gloss clear
Colored quartz double broadcast, textured slip-resistant topcoat
UV-stable polyaspartic with textured flake or quartz
Heavy-build epoxy for jacks, mats, tack and tools
Phased by section, high-build epoxy or quartz, cove and striping as needed
Failed DIY paint or peeling epoxy ground off before the new system
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
| Flake floor job | Est. investment | Est. time on site |
|---|---|---|
| Two-car garage, full broadcast flake (400 to 576 sq ft) | Est. $2,800 to $6,200 | Est. 1 to 2 days |
| Three-car garage, double broadcast flake (650 to 850 sq ft) | Est. $4,200 to $7,200 | Est. 2 to 3 days |
| One-car garage, solid color before any flake (288 to 392 sq ft) | Est. $1,500 to $3,600 | Est. 1 to 2 days |
| Workshop or home gym, heavy build (400 to 576 sq ft) | Est. $2,200 to $5,800 | Est. 2 to 3 days |
Full broadcast uses far more flake than a partial scatter, so a three-car double broadcast like Brian's sits higher in each estimated range, and a garage with peeling paint or deep cracks adds grinding and repair time.
These flake prices are estimates and subject to change; the written quote after we measure and test the slab sets the final price and the install schedule, based on coverage, square footage and the condition of the concrete.
Flake is one finish among several we install across Riverside County, from Cowan Heights to Lake Hills. Homeowners who want the floor back fastest read about one-day polyaspartic floors, those who want the full multi-coat build start with garage floor epoxy coating, and wet laundry rooms often suit a quartz broadcast floor instead of vinyl chips.
Homeowners from Lemon Heights to Victoria Grove choose us because we bring the blend samples to the slab and the same crew that grinds the floor throws the flake. In 12 years and 1,187 projects we have written every coat, its thickness and the coverage into each quote, and the 2-year workmanship warranty covers peeling, delamination and hot-tire pickup.
We lay flake floors within a 45-mile radius of Riverside, including ranch garages in Norco and Woodcrest, three-car slabs in Yorba Linda and estate garages in Diamond Bar. Villa Park and North Tustin are on the same Orange County route.
Flake floors are the usual first step in a garage makeover package, and the same broadcast works on detached shops through our shop and barn floor coatings.
Full broadcast is our usual pick for working garages, because it hides dust and tire marks and adds thickness; partial suits a cleaner look.
A two-car full flake garage is typically estimated at $2,800 to $6,200, and your written quote sets the final price.
A full broadcast adds texture, and we add grit to the clear for a 0.60 to 0.85 DCOF where the floor gets wet.
Earth blends hide dust and dirt, gray blends like the gravel flake on Gary's El Sobrante garage hide oil and tire marks, and high-contrast blends show the most.
Most two-car flake floors take an estimated 1 to 2 days, and three-car garages typically an estimated 2 to 3 days.
Yes, we bring sample boards to the estimate so you can see each blend in your own garage light.
Yes, Norco, Yorba Linda, Woodcrest and Eastvale are regular stops on our schedule.
California caps our deposit at the smaller of $1,000 or 10% of the contract under Business and Professions Code 7159.5, and we stay inside it.
Request a free estimate, and we will bring flake samples, test the slab and write a quote with the coverage spelled out.
Slide the handle. Same space and camera: only the floor changed.
BeforeAfterStart to finish
We walk the slab with you, map cracks, joints and old coatings, and take moisture readings before a system is named.
The system, every coat and its thickness, the colors and the cure and return-to-service times arrive in writing.
The slab is diamond ground with dust control, cracks and joints are filled, and each coat goes down inside its recoat window.
We walk the cured floor with you, go over the care notes and tell you when cars or equipment can come back.
Where we work
Call us or send the form, and we will book a free moisture test and a written estimate.
Calls only, we do not receive text messages.
