Commercial or multi-car facility floor
- Est. investment
- $5,500 to $14,000 per section (1,000 to 2,000 sq ft)
- Est. duration
- 3 to 5 days
Phased by section, high-build epoxy or quartz, cove and striping as needed
Medical, Dental and Clinic Floors in Riverside, CA
Riverside Epoxy Flooring Group is the Inland Valley's clinic flooring contractor, working with dental practice owners, medical office facility managers and veterinary clinic owners on seamless epoxy operatory floors, integral cove base, and disinfectant-resistant topcoats. We handle suites from a 1,000 sq ft single-dentist office to a 2,000 sq ft multi-provider clinic with exam rooms, sterilization and lab space.
Request a bid or a site walk
Seamless Floors for Practices That Cannot Close
Our crews work open practices and medical office buildings, phasing each install around patient hours so the schedule loses no clinic days and the waiting room never smells of solvent. Backed by 12 years in business and a 2-year workmanship warranty, we have finished over 1,187 projects, and practice owner references are available on request.
From the sheet vinyl tear-out and slab moisture test to the coved corners and the final wipe-down test, our team handles the parts of a clinic floor job that decide whether it finishes on schedule. Serving Riverside and neighboring Diamond Bar, Claremont and Eastvale, we keep to the practice's calendar, work nights and weekends while the office is closed, and hand back rooms ready for Monday's first patient.
Request a bid with your suite size, room count and the days the practice is closed, and we will walk it after hours.
What you can hold us to
The Crew Behind Every Floor
12 yearsGrinding and coating slabs across the Inland Empire and Orange County
1,187Garage, home, shop and commercial floors completed
2-year2-year workmanship warranty against peeling, delamination and hot-tire pickup
45 milesFrom Riverside out to Villa Park, Claremont and San Antonio Heights
Why Clinics Choose a Seamless Floor
A seamless floor leaves no joints for fluids, grime and microbes to sit in, which is the whole reason a clinic replaces sheet vinyl or tile with resin. Vinyl seams open at the chair bases and under rolling stools, grout lines stain, and every joint is a line the cleaning crew has to scrub. Rachel's dental suite in Diamond Bar was a dental suite moving off sheet vinyl with seams that held grime at the chairs. A poured resin floor runs wall to wall in one piece, so a single pass of the mop covers the whole operatory.
Cove Base and the Corners That Matter
Integral cove base turns the floor up the wall as one piece, so there is no wall-floor joint left where contaminants collect. We form the cove in the same resin as the floor on every North Tustin or Villa Park suite, generally about four inches high, and run it behind casework, around door frames and into the sterilization alcove. Exam rooms in Claremont and Eastvale medical buildings get the same coved detail as a surgical suite, because the corner is where a mop leaves soil behind.
Chemical Resistance to Daily Disinfection
Your cleaning chemicals choose the clear coat, because a floor wiped with phenolics, quaternary ammonium cleaners and dilute bleach has to take them without etching, fading or hazing. We pick the topcoat from the coating maker's chemical-resistance chart against the products your staff use, because our 2-year workmanship warranty against peeling, delamination and hot-tire pickup has to hold in a room mopped every night. Veterinary clinics in Norco and Woodcrest add urine and kennel wash to the list, so their runs get a textured, fully sealed build.
Clinic Floor Specifications
- Surface prep
- Mechanical diamond grinding to a CSP 2 to CSP 3 profile on every floor, never acid etching
- Dry film thickness
- 15 to 35 mils on a multi-coat flake system, 40 to 120 mils on high-build and self-leveling floors
- Basecoat solids
- 80% to 100% solids by volume, so the coat does not shrink thin as it cures
- Topcoat
- UV-stable aliphatic polyaspartic clear coat that will not amber in the sun through an open garage door
- Moisture testing
- Every slab tested; above 3 lbs per 1,000 sq ft per 24 hours it gets a moisture-mitigating epoxy primer
- Hot-tire resistance
- Rated for tire contact heat from 140°F to 180°F
- Slip resistance
- 0.60 to 0.85 DCOF with aluminum oxide or polymer grit in the clear coat
- Hardness
- 75 to 85 Shore D, so a dropped wrench or a jack stand does not gouge it
- Compressive strength
- 8,000 to 12,000 PSI, well above the 3,000 to 4,000 PSI of the slab underneath
- VOC content
- 0 to 50 g/L, inside South Coast AQMD limits
- Walk-on time
- 4 to 8 hours on polyaspartic, 18 to 24 hours on 100% solids epoxy
- Park-on time
- 24 to 36 hours on polyaspartic, 72 to 96 hours on 100% solids epoxy
Clinic Floor Cost and Pricing
Old coating removal by diamond grinding
- Est. investment
- $800 to $3,000 per floor (400 to 600 sq ft)
- Est. duration
- 4 to 8 hours
Failed DIY paint or peeling epoxy ground off before the new system
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Clinic floors in Riverside County are typically budgeted per section, at an estimated $5,500 to $14,000 for each 1,000 to 2,000 sq ft, and vinyl removal, cove footage and moisture mitigation move the number most. Rachel's 1,400 sq ft dental suite came in at an estimated $7,800 to $11,600 with tear-out and cove base included.
| Job type | Est. investment | Est. duration on site |
|---|---|---|
| Commercial or multi-car facility floor | Est. $5,500 to $14,000 per section (1,000 to 2,000 sq ft) | Est. 3 to 5 days |
| Dental suite, seamless epoxy with integral cove base | Est. $7,800 to $11,600 | Est. 3 to 5 days |
| Old coating removal by diamond grinding, inside the floor job | Est. $800 to $3,000 per floor (400 to 600 sq ft) | Est. 4 to 8 hours |
Clinic prices on this page are budgetary estimates and are subject to change. Your written quote, confirmed on bid after the after-hours walk and the slab moisture test, sets the final price and the install schedule, and it depends on room count, linear feet of cove and what sits under the old floor.
Clinic Project: A Dental Suite in Diamond Bar
Rachel, hillside tract off Grand Avenue, Diamond Bar
Medical, Dental and Clinic Floors
- Material
- seamless epoxy with integral cove base, light gray, antimicrobial-ready topcoat
- Size
- dental suite, about 1,400 sq ft
- Est. investment
- $7,800 to $11,600
- Est. duration
- 3 to 5 days
A dental suite moving off sheet vinyl with seams that held grime at the chairs
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Rachel runs a dental practice on a hillside tract off Grand Avenue in Diamond Bar, and her vinyl was failing at every chair. We recommended a seamless epoxy with a coved base, installed Friday to Monday so no patient days were lost. The dental suite, about 1,400 sq ft, in seamless epoxy with integral cove base, light gray, antimicrobial-ready topcoat, came in at an estimated $7,800 to $11,600 over an estimated 3 to 5 days. Her operatories now wipe down in one pass with no seams at the chairs.
Working Around Patient Hours
Clinics are coated after hours and in sections, so the practice keeps seeing patients through the job. Most single-suite offices run an estimated 3 to 4 days from Friday evening, with tear-out and grinding the first night, the floor and cove over the weekend, and a fast topcoat that typically allows foot traffic in an estimated 4 to 8 hours. Larger clinics in Riverside and Claremont are split by wing, so one hallway of exam rooms closes while the other keeps its schedule. Every phase in a Yorba Linda or El Sobrante clinic is sealed off with plastic and dust extraction on the grinder, so dust never reaches the open side.
How a Clinic Floor Job Runs
A clinic floor job runs in five steps, the same in a San Antonio Heights pediatric office as in a Diamond Bar dental suite.
- After-hours walk of every room, casework edge and doorway inside our 45-mile radius.
- Slab moisture test and a review of the disinfectants your staff use.
- Written bid per section, typically an estimated $5,500 to $14,000 for each 1,000 to 2,000 sq ft, with the phasing plan.
- Tear-out, grind, cove base and floor build, typically an estimated 3 to 5 days per section.
- Wipe-down test, rooms handed back, and the 2-year workmanship warranty against peeling, delamination and hot-tire pickup in writing.
Why Practice Owners Choose Riverside Epoxy Flooring Group
Practice owners choose us because we schedule the floor around their patients, and 12 years of after-hours work has taught our crews to leave a room clean enough to see patients in. Our owner reads every moisture test himself, and coating makers' product warranties, typically 5 to 10 years on professionally installed systems, are passed through to you in writing.
Clinic Floor Service Areas
We bid medical, dental and veterinary floors across a 45-mile radius of Riverside, from medical offices near the Mission Inn to clinics along the 91. Diamond Bar, Claremont and San Antonio Heights bring dental and pediatric practices near the foothills, Eastvale and Norco bring new medical office buildings and animal hospitals, and Yorba Linda, Villa Park and North Tustin bring Orange County specialty practices.
Related Commercial Services
Clinics sit inside our wider commercial and industrial floor coating work. Restaurant owners read our commercial kitchen floor systems, medical office landlords with a garage compare parking deck traffic coatings, and associations managing shared parking read about HOA and apartment garage coatings. Practice owners coating a garage at home can look at our residential floor work from Riverside.
Medical and Dental Floor Questions
What is the best floor for a dental office?
A seamless epoxy with an integral cove base is the best floor for most dental offices, the system in Rachel's Diamond Bar suite, because it leaves no seams at the chairs.
Can you install while the practice stays open?
Yes, we work Friday to Monday or by wing, so Claremont and Riverside practices lose no patient days.
Will the floor stand up to our disinfectants?
Yes, we match the topcoat to the phenolics, quaternary ammonium and bleach products your Eastvale or Norco staff actually use.
How long does a clinic floor take?
Most single suites take an estimated 3 to 4 days from Friday evening, with larger clinics phased wing by wing.
What does a clinic floor cost?
Clinic floors are typically an estimated $5,500 to $14,000 per 1,000 to 2,000 sq ft section, and your written quote sets the final price.
Do you include cove base?
Yes, every clinic floor from Yorba Linda to San Antonio Heights gets an integral cove base formed in the same resin as the floor.
Will there be dust or odor?
No, the grinder runs with dust extraction behind plastic, and a coating at 0 to 50 g/L, inside South Coast AQMD limits leaves no lingering smell.
Request a Bid for Your Clinic Floor in Riverside
Request a bid with your suite size, room count, current flooring and closed days, and we will schedule an after-hours walk.
Floors We Have Finished
Start to finish
From Moisture Test to the Final Walk
Test and measure
We walk the slab with you, map cracks, joints and old coatings, and take moisture readings before a system is named.
The written quote
The system, every coat and its thickness, the colors and the cure and return-to-service times arrive in writing.
Grind, repair and coat
The slab is diamond ground with dust control, cracks and joints are filled, and each coat goes down inside its recoat window.
The final walk
We walk the cured floor with you, go over the care notes and tell you when cars or equipment can come back.
Where we work
Where We Install It
Request a bid
Ready to Talk About Medical, Dental and Clinic Floors?
Call us or send plans, square footage or a walk date, and we will set a site walk and return a written bid.
Calls only, we do not receive text messages.