Riverside Epoxy Flooring Group is Riverside County's trusted expert in garage floor epoxy coating, specializing in diamond-ground slab prep, 100% solids epoxy basecoats, and UV-stable polyaspartic topcoats. We offer crack and control-joint repair and solid-color or vinyl flake broadcast finishes.
Get a free floor estimate
Our team provides a moisture test on every slab, delivering a garage floor that shrugs off hot tires for homes and long-wearing coatings for both residential and commercial projects. Backed by 12 years in business and our 2-year workmanship warranty, we've completed over 1,187 projects, from a one-car solid-color floor to three-car garages with a double flake broadcast.
From routing shrinkage cracks to pulling the basecoat and timing the clear coat against the afternoon heat, our team handles every detail. Serving Riverside and neighboring Woodcrest, Eastvale and Norco, we grind every garage down to bare, open concrete before a single coat goes on.
Call today for a free estimate, and we will test your slab for moisture before we recommend a system.
What you can hold us to
Marcus, Canyon Crest, Riverside
A box-store kit from five years earlier was peeling in both tire paths and the slab had two long shrinkage cracks
Monica, newer tract beside the ranch lots, Woodcrest
A new-build garage with a slab still showing curing compound and builder overspray
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Marcus in Canyon Crest had a box-store kit from five years earlier peeling in both tire paths, and the slab had two long shrinkage cracks. We ground the old paint off, chased and filled both cracks, then laid a 100% solids epoxy base with gray and black vinyl flake and a polyaspartic clear across his 2-car garage, about 480 sq ft. The job was an estimated $3,400 to $4,600 and took an estimated 1 to 2 days, and both of his cars are back on a floor that hides dust and sheds oil drips with a wipe.
Monica in Woodcrest bought a new-build home whose garage slab still carried curing compound and builder overspray. A full grind took both off so the epoxy could grip bare concrete instead of the builder's leftovers, and a partial flake went down over the base on her 2-car garage, about 450 sq ft. Her floor was an estimated $2,900 to $4,200 and most of the work took an estimated 1 to 2 days on site.
Garage epoxy fails at the prep stage far more often than at the resin, because a coating can only grip concrete that has been opened up. A box-store kit leans on an acid etch and a thin water-based coat of roughly 2 to 4 mils, and a hot tire from the 91 or the 215 softens that film and pulls it off when the car backs out. That is exactly how the kit in Marcus's Canyon Crest garage failed in both tire paths.
A pro system on an older San Antonio Heights or Claremont slab starts with a diamond grinder, not a bottle of acid. On new Eastvale and Woodcrest tracts, the builder's cure coat is the hidden risk: it looks like bare concrete and repels resin.
Our prep process takes every garage slab, from tracts near Eastvale Square to Claremont bungalows, to a CSP 2 to CSP 3 profile with a walk-behind diamond grinder and a dust extractor, so the house stays clean. Old coatings come off in the same pass; on a peeling floor that grind-off typically adds an estimated $800 to $3,000 and roughly 4 to 8 hours to the job.
Older slabs in Norco, North Tustin and the Wood Streets often carry decades of oil, so we degrease before grinding rather than grinding the oil deeper.
A garage epoxy system is three layers, each doing one job. The 100% solids basecoat soaks into the ground slab and carries the color. The broadcast, either a partial or full vinyl flake, adds texture and hides dust and tire marks. The clear topcoat seals the flake, and most garages get it within the same estimated 1 to 2 days.
Our lead installer mixes each batch on site and times the broadcast so the flake lands before the resin skins over.
Inland heat decides the topcoat more than any other factor from Riverside to Villa Park, because plain aromatic epoxy ambers where afternoon sun reaches it through an open garage door. We finish every garage epoxy floor with a UV-stable aliphatic polyaspartic clear rated for tire heat from 140°F to 180°F, the range a car reaches after a summer drive in from Corona or the Inland Empire freeways.
On a 100°F afternoon in Diamond Bar or El Sobrante, heat shortens the resin's working time, so we start early, keep material out of the sun and pull smaller batches, so the coat levels instead of setting up under the squeegee.
Garage floor epoxy in Riverside is typically estimated at $2,800 to $6,200 for a two-car garage with a full flake system, with slab condition, old coatings and garage size moving the price most.
Diamond grind, crack fill, 100% solids basecoat, clear topcoat
Full broadcast vinyl flake, UV-stable clear coat, park in about a day
Grind, stem walls optional, double broadcast flake, polyaspartic topcoat
Moisture-mitigating primer, then flake, color or polished finish
Hand-worked metallic pigment over a flat primed slab, high-gloss clear
Colored quartz double broadcast, textured slip-resistant topcoat
UV-stable polyaspartic with textured flake or quartz
Heavy-build epoxy for jacks, mats, tack and tools
Phased by section, high-build epoxy or quartz, cove and striping as needed
Failed DIY paint or peeling epoxy ground off before the new system
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
| Garage epoxy job | Est. investment | Est. time on site |
|---|---|---|
| One-car garage, solid color epoxy (288 to 392 sq ft) | Est. $1,500 to $3,600 | Est. 1 to 2 days |
| Two-car garage, full flake system (400 to 576 sq ft) | Est. $2,800 to $6,200 | Est. 1 to 2 days |
| Three-car garage, epoxy base with full flake (650 to 850 sq ft) | Est. $4,200 to $7,200 | Est. 2 to 3 days |
| Peeling kit ground off before the new floor | Est. $800 to $3,000 added | Est. 4 to 8 hours added |
| Stem walls coated with the floor | Est. $300 to $900 added | Est. 4 to 8 hours added |
Most two-car garages we coat in Victoria Grove and Lake Hills land near the middle of that estimated range, while a garage with a failed kit, deep cracks or a high moisture reading sits higher.
Garage prices shown here are estimates only and may change; the written quote after our moisture test sets the final price and the install schedule, based on your square footage, slab condition and the topcoat you choose.
A 100% solids epoxy base under a polyaspartic clear gives the most thickness, a full polyaspartic system the fastest return, and a water-based kit the shortest life.
| System | Walk-on time | Park-on time | In afternoon sun |
|---|---|---|---|
| 100% solids epoxy, polyaspartic clear | Est. 18 to 24 hours | Est. 72 to 96 hours | Clear coat holds its color |
| Full polyaspartic system | Est. 4 to 8 hours | Est. 24 to 36 hours | Holds its color |
| Water-based epoxy kit | Varies by brand | Varies by brand | Ambers and lifts under hot tires |
Garage epoxy is one of several coating materials we put down across Riverside County. Homeowners who need the cars inside the next day choose a one-day polyaspartic garage floor, collectors in Villa Park and Diamond Bar lean toward designer metallic epoxy, and wet laundry and mud rooms get a quartz broadcast system.
Homeowners hire us because the same crew that tests the slab grinds it and coats it, and our owner still reads moisture results himself. In 12 years and more than 1,187 projects, our garage floors have been written with every coat and its thickness on the quote, and the 2-year workmanship warranty covers peeling, delamination and hot-tire pickup in writing.
We coat garages within a 45-mile radius of Riverside, from older slabs in the Wood Streets to new tracts in Eastvale and ranch lots in Woodcrest and Norco. Orange County garages in Yorba Linda and foothill homes in Claremont are on the same schedule.
Garage epoxy pairs naturally with a full garage makeover package, as in Teresa's Yorba Linda garage, where cabinets went in after the floor. Detached woodshops like Linda's in Cowan Heights and RV bays on ranch lots get a heavier build through our shop and barn floor coatings, and the apron in front of the door can match through driveway coating and resurfacing.
A one-car garage is typically estimated at $1,500 to $3,600 and a two-car full flake floor at $2,800 to $6,200, and your written quote sets the final price after the moisture test.
A 100% solids epoxy floor typically needs an estimated 72 to 96 hours before parking, while a polyaspartic system is usually ready in an estimated 24 to 36 hours.
Grinding opens the concrete evenly to a CSP 2 to CSP 3 profile and removes sealers, while acid leaves moisture and patchy pores behind.
No, our systems are rated for tire heat from 140°F to 180°F, and hot-tire pickup is covered by the 2-year workmanship warranty.
We grind the old kit off first, which typically adds an estimated $800 to $3,000, because new epoxy over a failing coat fails with it.
Yes, every crack is routed and filled as part of the floor job, so the repair is in the quote rather than a separate visit.
Yes, Eastvale, Norco, Woodcrest and El Sobrante are regular stops on our Riverside schedule.
We ask for no more than $1,000 or 10% of the contract price, whichever is less, the cap set by California Business and Professions Code 7159.5.
Request a free estimate, and we will measure the garage, test the slab and write a quote that names every coat.
Slide the handle. Same space and camera: only the floor changed.
BeforeAfterStart to finish
We walk the slab with you, map cracks, joints and old coatings, and take moisture readings before a system is named.
The system, every coat and its thickness, the colors and the cure and return-to-service times arrive in writing.
The slab is diamond ground with dust control, cracks and joints are filled, and each coat goes down inside its recoat window.
We walk the cured floor with you, go over the care notes and tell you when cars or equipment can come back.
Where we work
Call us or send the form, and we will book a free moisture test and a written estimate.
Calls only, we do not receive text messages.
